Weather Station Installation Tips : How To Install Your Personal Weather Station?

4 years ago

Weather station installation is a big job, with many steps and much more to it than simply going out and buying one.

This article will cover all the basic steps in order to install a weather station at home. It will cover everything from planning for your installation to setting up your weather station, as well as tips on what you should do in order to install a weather station at home.

Weather Station Installation Tips

Installing a weather station is no small task. It requires specialized tools and knowledge. Weather stations can be tricky to install because they come in different packages depending on where you are. So, when deciding on which type of weather station to get, it’s helpful to think about where you will be placing it and what role it will play in your overall weather station installation.

How To Plan Your Weather Station Installation?

  • In the initial installation of the weather station before getting started, think about what you can do to help yourself. A basic plan might be.
  •  As you know Wireless weather stations are easy to set up, but they have a restricted range without the use of wireless repeaters. Cabled models of weather stations are less expensive and provide uninterrupted data, but they require a cable to be built in. 
  • Also, to install a weather station, sensors should be mounted in an open area at least four feet above ground level. 
  • The majority of outdoor sensors of weather stations are mounted separately that must be firmly joined to the ground using weather station mounting arms or integrated sensor suites.

How To Set Up A weather Station?

  • Unpacked the weather station and assemble it according to its manual
  • A good place to start would be to put it near something that does not get hot or cold so that the weather station collects data from both directions.
  • Your weather station should have as much exposure to sunlight as possible.
  • You will need a thermometer/hygrometer and two rulers.
  •  Use your thermometer to measure temperature and the hygrometer for humidity.
  •  You will probably need some kind of heat source to keep the thermometer at a constant temperature. It will be important that you know what the ambient weather is like at your station to ensure that no significant changes occur.
  • Once you have your weather station installed it will not be doing much until you get the temperatures and the humidity correct. 
  • If your weather station is still in the testing phase, Put in an appropriate data logger to record the temperature and humidity every 10 seconds for 24 hours or more per day,

FAQs

The weather station is ideally Installed at a height of 4 to 6 feet above the ground. generally, it should be 4 times the height of the next barrier in terms of horizontal distance. Make that the gauge is leveled on the ground and away from any horizontal surfaces that might cause rain-splashing or snow accumulation.

At the very least, we recommend that you do weather station maintenance once per season. This is especially vital in the fall and winter when your equipment is put to the most use. Depending on the weather and the surrounding environment, some may require maintenance as frequently as once a month.

Your weather station should complement your home. Installation of the weather station should be done where there is adequate sunlight. It should also be done in a place that will remain dry even in the event of a power outage. Weather stations that hang over fences or steal the spotlight from your house make for poor appearance and detract from your property

The cost of Personal weather stations installation varies from $150 to $2,500, depending on the equipment’s quality and accuracy.

Published by
weather-station
4 years ago